[. . . ] The appliance should only be switched off when it is in stand-by mode. When the standby button a lights green, the appliance is ready for operation. [. . . ] the tank must always containsufficientwaterforoperatingthe appliance. Tip: Prewarm cups, especially small, thick espresso cups, by placing on the cup shelf 14 or rinsing with hot water. Pressandholdthecoffeedispensing button 5 or K until the desired volume of coffee has been delivered (range approx. To restore the factory setting of approximately 125 ml, simply reset the appliance. This function allows water to be heated for a cup of tea, for example. Justpressthecoffeedispensingbutton 5 or K within 3 seconds after brewing is complete. You canfoamthemilkfirstandaddthecoffee on top, or foam the milk separately and pour it into the coffee. Immersethenozzle8 deep into the milk, but do not let it touch the bottom of the cup. Io foam more milk, press the steam T button h again and repeat the whole process. Io generate more steam, press the steam T button h again and repeat the whole process. Note: If the appliance is cold when switched on with the standby button a, or if it is set to standby after brewing coffee, it is automatically rinsed, i. Holdtheredbuttona down and push the handle b up until you hear it engage. [. . . ] This appliance is labelled in accordance with the European Directive 2002/96/EG relating to waste electrical and electronic equipment ­ WEEE. the directive provides the framework for the EUwide takeback and disposal of endoflife appliances. [. . . ]